Clamco W400 Series: Impulse Sealers

Features:

• Impulse type sealing arms are electromagnetically activated with foot pedal switch.
• Heat is applied by both upper and lower sealing bars for a positive liquid and airtight seal.  No preheating is required.  Both sealing bars are cool when not in use.
• The seal width is approximately one-eighth inch.
• An audible time-temperature cycle indicator is included on all standard units.  The audible indicator is not provided on units with optional dwell control.
• The time-temperature cycle is precisely controlled by a solid state electronic timer.  It is infinitely adjustable from a fraction of a second to five seconds for sealing a wide variety of films and film thicknesses.
• On heavy films, the operator can allow more time for a seal to set, after completion of the sealing cycle, by keeping the foot pedal depressed.
• Teflon® covering prevents firm from adhering to sealing bars during cycle.

Specifications:

W400-12:

• Maximum film thickness two 10 mil thicknesses
• Bag sizes to 12" wide
• Machine dimensions 14"W x 7"H x 10"D

W400-16:

• Maximum film thickness two 10 mil thicknesses
• Bag sizes to 16" wide
• Machine dimensions 18"W x 7"H x 9"D

W400-24:

• Maximum film thickness two 10 mil thicknesses
• Bag sizes to 24" wide
• Machine dimensions 26"W x 7"H x 9"D

Teflon is a registered trademark of DuPont.
Specifications and design features subject to change without notice.
Some photos may show accessories not part of basic machine.