|
Model
220 True Line Perforator
|
Model
220 True Line Perforator Specs
|
| Maximum
sheet size: |
20"
W x 23" L |
50.8cm
x 58.4cm |
| Minimum
sheet size: |
3"
W x 3" L |
7.6cm
x 7.6cm |
| Minimum
space between standard lines of perforation: |
3/4"
(1/2" available) |
1.9cm |
| Standard
edge margin: |
3/4"
Narrow margin of 3/8" available |
1.9cm |
| Length,
front to back: |
55" |
139.7cm |
| Width,
side to side: |
32" |
81.3cm |
| Height: |
42" |
106.7cm |
| Net
weight: |
275
lbs. |
125Kg |
| Shipping
weight (friction): |
366
lbs. |
166Kg |
| Shipping
weight (vacuum): |
472
lbs. |
214kg |
| Export
shipping weight (friction): |
430
lbs. |
195kg |
| Export
shipping weight (vacuum): |
546
lbs. |
248kg |
|
Standard
electrics (friction): 115v/60hz/1ph 3.5
amps*
|
|
Standard
electrics (vacuum): Additional 115v/60hz/1ph
20 amp slow-blow recommended
|
|
*Contact ADTECH
for alternate electrical requirements.
|
Unique
True Line Features:
- Perforating
heads with built-in chip removers
- Stripper-completely
surrounding perforating cutters
- Molded
drive rollers
- See-through
safety cover
- Heads
can be quickly added or removed
- Up
to 5 perforating heads can be used on 20" machine*
- Retrofit
vacuum kits available for most models
- "CE"
style guarding available
|
*
Greatly depends on stock to be run.
Standard
True Line Features:
- 2
sets of perforating heads with burr rollers
- 1
set of scoring/creasing head
- 2
sets of drive rollers
- 1
set of tools
- 8
perforator blades
- Miscellaneous
extra parts
|
Accessory
Equipment
- Perforating
heads with burr rollers
- Narrow
margin 3/8" perforating heads
- Special
1/2" slot perforating heads (between lines of perforation)
- Knife-cut
snap-out cutters
- Pressure-sensitive
slitting attachment (223 only)*
- Full
circle shaft support (223 only)
- Slitting
heads
- Micro-perf
heads
- Extra
wide scoring heads
- Special
engineered heads
- Gutter-cut
heads
- Compact
Disc "CD" perf heads
- CE
package (complies to "CE" requirements)
Mandatory in European Community
- Ball-bearing
construction
- Retro-fit
Vacuum Kits (converts friction to vacuum)
|
*The
optional slitting attachment for pressure sensitive material
permits partial slitting of stock. Due to the consistent
depth control required pressure sensitive slitting is recommended
only on the Model 223 Perforator.
|
