AdTech Graphic Service Home | About AdTech Graphic Service | Contact AdTech Graphic Service | All Used Printing Equipment | Rosback Bindery Equipment
Clamco Packaging Equipment | Microcut Paper Cutter Controls | JMD / AdTech Bookbinding Equipment | Bernhardt / AdTech Folder Gluers | Knorr Systeme Paper Handling Equipment
Rosback Company True Line Series Perforators


223 True Line Perforator

Model 223 True Line Perforator

Model 223 True Line Perforator Specs
Maximum sheet size: 26" W x 26" L 66cm x 66cm
Minimum sheet size: 3" W x 3" L 7.6cm x 7.6cm
Minimum space between standard lines of perforation: 3/4"
(1/2" available)		 1.9cm
Standard edge margin: 3/4"
Narrow margin of 3/8" available		 1.9cm
Length, front to back: 61" 154.9cm
Width, side to side: 38" 96.5cm
Height: 44" 111.8cm
Net weight: 335 lbs 152 kg
Shipping weight (friction): 423 lbs. 191.8 kg
Shipping weight (vacuum): 538 lbs. 244 kg
Export shipping weight (friction): 520 lbs. 235.8 kg
Export shipping weight (vacuum): 650 lbs. 294.8 kg
Standard electrics (friction): 115v/60hz/1ph 3.5 amps*

Standard electrics (vacuum): Additional 115v/60hz/1ph 20 amp slow-blow recommended

*Contact ADTECH for alternate electrical requirements.

Unique True Line Features:

  • Perforating heads with built-in chip removers
  • Stripper-completely surrounding perforating cutters
  • Molded drive rollers
  • See-through safety cover
  • Heads can be quickly added or removed
  • Up to 5 perforating heads can be used on 20" machine*
  • Retrofit vacuum kits available for most models
  • "CE" style guarding available

* Greatly depends on stock to be run.

Standard True Line Features:

  • 2 sets of perforating heads with burr rollers
  • 1 set of scoring/creasing head
  • 2 sets of drive rollers
  • 1 set of tools
  • 8 perforator blades
  • Miscellaneous extra parts

Accessory Equipment

  • Perforating heads with burr rollers
  • Narrow margin 3/8" perforating heads
  • Special 1/2" slot perforating heads (between lines of perforation)
  • Knife-cut snap-out cutters
  • Pressure-sensitive slitting attachment (223 only)*
  • Full circle shaft support (223 only)
  • Slitting heads
  • Micro-perf heads
  • Extra wide scoring heads
  • Special engineered heads
  • Gutter-cut heads
  • Compact Disc "CD" perf heads
  • CE package (complies to "CE" requirements)
    Mandatory in European Community
  • Ball-bearing construction
  • Retro-fit Vacuum Kits (converts friction to vacuum)

*The optional slitting attachment for pressure sensitive material permits partial slitting of stock.  Due to the consistent depth control required pressure sensitive slitting is recommended only on the Model 223 Perforator.
Adtech Graphic Service
8166 Liberty Way
Bergen, New York 14416
1.800.422.0821
Phone: 585.494.0476 | Fax:585.494.1233
Copyright © 2008 Adtech Graphic Service.
All Rights Reserved.