953
Pro Feeder, Feeds Single Sheets, Signatures and Booklets
| PHOTOGRAPHS & DETAILS
Maximum
production is assured because the ProFeeder feeds from
the front of an automatically advanced, edge-loaded
hopper, and there is no need to stop the feeder to reload
the hopper whether you are feeding single sheets or
signatures.
Setup
normally requires less than five minutes. Load
material in the hopper and hand adjust the side hopper
supports to center the material.
This
versatile variable speed DC drive unit feeds the largest
range of stock thickness, from 16lb bond to 64pp signatures.
It is no longer necessary to purchase two separate machines
to feed single sheets, signatures and booklets.
Self
adjusting telescoping suckers require no adjustment
at the feeder even when changing over from the lightest
single sheet to the heaviest signature.
The
cam-closing gripper that removes the material from the
hopper and carries it to the delivery guides underneath
does not require adjustment either. Two sets of
grippers on the feeder wheel (one every 180 deg.) assure
a smooth flow of material without marking.
Two
streams of air are blown into the feeder pile from the
bottom for positive separation and to eliminate doubles.
This
self powered single pocket feeder feeds single sheets,
signatures (stitched or unstitched) and glued
booklets into other equipment such as a Rosback
250 Series Trimmer.
The ProFeeder is mounted on casters for easy transit
throughout your plant.
